FLY III
Elevate Your Flight
Allround Introducing the FLY III – the latest evolution in our quest to deliver unparalleled wing performance. Building on the solid foundation of the FLY series, the 2025 FLY III takes everything you loved about its predecessor and refines it for even greater speed, control, and versatility across a wide range of conditions.
What’s New?
- Enhanced Leading Edge Stiffness: We've significantly increased the stiffness of the leading edge (LE), allowing the FLY III to maintain its shape under high loads and deliver superior control in strong winds. This enhancement results in better speed, quicker acceleration, and improved upwind performance, all without sacrificing the early take-off that the FLY series is known for.
- Refined Shape and Twist: The FLY III features a carefully refined shape and twist, engineered to work in harmony with the increased LE stiffness. These adjustments not only boost overall performance but also provide a more controlled and stable ride, especially when conditions become challenging.
INCLUDED: Carbon Duo Handles, Fly Backpack, Pump Adapter, Bladder Repair Set
Leash sold separately.
For the FLY III, our focus was on refining what was already an exceptional wing. By increasing the leading edge stiffness and fine-tuning the shape, we’ve achieved a wing that not only excels in speed and control but also offers a more stable and confident ride in strong winds. It’s about pushing the boundaries while keeping the FLY’s signature versatility intact.
For the FLY III, our focus was on refining what was already an exceptional wing. By increasing the leading edge stiffness and fine-tuning the shape, we’ve achieved a wing that not only excels in speed and control but also offers a more stable and confident ride in strong winds. It’s about pushing the boundaries while keeping the FLY’s signature versatility intact.
Key Features
FLY II
UNIQUE HANDLE DESIGN
Calibrated positions for effortless balanced flight, ergonomic design to reduce fatigue and position the wing at the optimum flight angle.
HIGH QUALITY BLADDER
Long lasting shape control and easy to change in the unlikely event of a blowout.
Bladder made in Germany.
CANOPY MATERIAL
New for 2025, our canopy features Ripstop 5x5 in the front and Ripstop 6x6 in the back for the optimum balance of strength to weight.
Transverse paneling holds shape under load and reduces stretch over time.
UPDATED VENTED STRUT
Extended fill panel gives more control of the camber in the middle of the canopy and allows the pressure to equalize across the two sides of the wing.
SEPARATED AIR CHAMBER
The partition adds safety, increases the Leading Edge stiffness and allows the wing to be deflated more quickly.
HIGH LIFT CONCEPT
Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability.
HIGH TENSION CANOPY WITH STRUCTURED CAMBER LENS
The 3D shape of the canopy leading edge is defined by a series of transverse panels that converge at the wingtips. This leverages the LE Tube structure to maximize tension in the critical entry sections – the result is more lift and a higher stall angle for better acceleration in light winds, and the ability to fly efficiently at low angles of attack for better control and higher top speeds in strong winds.
SHAPE AND WINDOW DEVELOPMENTS
TECHNOLOGY UPDATES
In the 3rd generation of the FLY, we have achieved additional development milestones and are proud to unveil the enhanced and refined models: FLY III PRO and FLY III. The development of the FLY concept has been based on using the most proven materials, examining the technical development of wingfoiling down to the smallest detail and adjusting all the set screws.
REFINED SHAPE AND TWIST
- Carefully refined shape and twist.
- New baseline for all the design parameters.
- Carefully engineered to work in harmony with the increased Leading Edge stiffness.
These updates offer a boost in overall performance and a more controlled and stable ride, especially when conditions become challenging
100% Transverse Canopy Paneling
- The new panel layout that perfectly aligns material with the load paths.
- This is especially important in the critical leading edge where tension is a primary driver of performance.
- The trailing edge where proper engineering adds stability and drastically increases the lifespan of the materials.
DIHEDRAL PROFILE
- Makes the wing very roll stable, especially when flagging.
- Allows the upper half of the wing to be more vertical for improved upwind performance.
STRATEGIC WINDOW PLACEMENT
- Redesigned window shape and position for optimal visibility.
- Integrated into the new panel layout which ensures a perfect balance of visibility , lightweight construction and structural integrity, allowing you to keep your focus on the ride.
- Fly III and FireFLy II feature PVC for maximum visibility and Durability.
- Fly III Pro and FireFly Pro and Fly SL feature ultralight X-ply scrim.
EXTENDED FILL PANEL
- To gain more control of camber in the middle of the canopy.
- While maintaining the function of the vent.
- Balances the pressure from one side of the wing to the other.
COLOR RANGE
Style your wing.
PETROL
BERRY / PINK
WING SIZE RECOMMENDATION
As our high lift coefficient allows you to use a significantly smaller wing in any given conditions, please use this guide to appropriately size your wing to your usual riding conditions.
*Min recommended wind for 100kg+ rider weight = 10 - 12kts
40-60kg
60-85kg
85-100kg +
2.5m
2.5-3m
3.5-4.0m
2.5-3m
2.5-3.5m
4.0-4.5m
2.5-3.5m
3.0-4.5m
4.5-5.0m
3.5-4.5m
4.0-5.0m
5.0-5.5m
4.5-5.0m
4.5-5.5m
5.5-6.0m
5.0-5.5m
5.0-6.0m
6.5m*
