NeilPryde Windsurfing 2013

RS:One

The
Mast

NeilPryde's "Progressive Flex" bend curve maximizes sail performance and twist in two ways:

1. It combines a stiffer bottom section with a lightweight and responsive top section. A stiffer bottom section is required for draft stability and power, while the lightweight and responsive top section provides release in the head of the sail for control.

2. The defined taper of the mast improves it's responsiveness and dynamic performance. It does this by progressively flexing depending on the wind strength and the amount of load in the rig.

Simply speaking, as the wind strength increases, a sail will twist and the mast will bend from the top downwards. In light winds, only the top of the sail will twist so maximum power is available to the rider. In stronger winds, the sail twist will extend further down the leech to increase the level of control. The better a mast can progressively react to changes in the winds speed, the better a sail can react giving the rider maximum power, control stability and speed.
Filament Winding construction process to guarantee strong durability.

The light weight of 2.2kg to maximize the low end performance and ease of turning.
Moderate wall thickness for better handling.

Progressive flex allows the sail to twist as dynamically and efficiently as possible.

Mast
Specs

MAST LENGTH / CM Imcs Weight Carbon content
RS:One 460 460 25 2.2KG 65%

The
Boom


THE ULTIMATE PERFORMANCE-
ORIENTED ALUMINIUM BOOM
 
 
Harness line scale for easy harness lines adjustment.
Oversized mast cup in glass fiber reinforced injection moulding and monocoque aluminium tail extension for rigidity and strength.
Pressure flow forged aluminum head with VT joint lateral locating button prevents side to side movement while allowing articulation and exceptional stiffness.
T6 series alloy arms with high level of heat treatment attained, creating stiffer and stronger arms.
30 mm Handgrip diameter for optimum comfort and performance.
Outhaul kit set for instant outhaul trimming while sailing.

PRESSURE
FLOW
FORGING




'Pressure Flow Forging' is an innovative technology that allows for shaping of exceptionally stiff aluminum tubing.
The metal is allowed to 'flow' rather than stretch into shape. Fluid is injected at very high pressure into the aluminum tube that causes it to expand until it matches an external female mold. The process increases the density of the complex shapes that result in the strongest and most rigid aluminum booms on the market.

We also place the boom arms inside the head tube and this results in the outside diameter of the head being increased. As a final production process, this already high tech piece is heat tempered to create highest stiffness and strength.

Boom
Specs

Boom Length Adjust / Cm ArmDiameter / MM Adjustment
RS:One 200-250 50 30 Twin pin lever

Base &
Extension

ALUMINIUM FOR A HIGH LEVEL OF DURABILITY
 


High quality pre-stretched Rope



Rounded bottom edges provide protection to your feet.


Push pin quick release system
for more durability.


Enlarged XT finger print for easy release of buttons in cold water.


Stainless pulleys for less friction and greater durability.

Board
Bag

 
Holds 1 board, 1 Dagger-Board and 2 fins.

Zip moved away from the critical rail area and impact zone.
 
Durability of bag edges through outside frame made of Abrasion Resistant material.
Shoulder strap and carry handle for ease of transportation.

8mm 8mm PE foam body, 16mm PE foam on nose and tail.
Wheeled Bag: Reinforced bottom and strong off-road wheels.

Rig
Bag

Roof Rack mountable: Solid sliding Roof Rack Strap Tunnels allow the easy feeding of roof rack straps through the bag even when fully loaded with equipment.

Holds up to 3 masts, 2 sails, and 2 booms. Separate compartments for masts with individual spaces.

Wheeled Bag: Reinforced bottom and strong off-road wheels.

Stores Near You

Get Social

Newsletter

Resources

The Small Print

Help

Links