The NeilPryde mast program is based on the Matrix System designed to assure every NeilPryde sail will perform to its highest potential when used with the specified NeilPryde mast. The Matrix System is based around three performance levels; X35, X65 and X100. Higher performance level masts will have higher carbon |
content as well as use higher modulus carbon fibers. This will reduce the weight of the mast as well as significantly increase reflex speed resulting in higher performance. With the NeilPryde Matrix System you can choose a level of performance regardless of which NeilPryde sail you have and be assured that the mast/sail fit will be optimised. |
X100 SDM/RDM
If you are looking for performance with no compromises, X100 is the clear choice. Thanks to this mast's prepreg,
Discover more
X65 SDM/RDM
The X65 has 65% carbon content and filament winding construction. This mast is perfect if you are looking for durability with good response and a light feel.
Discover more
X35 SDM/RDM
With a 35% carbon content and filament winding construction the X35
offers affordable performance.
Discover more
DRAGONFLY
These composite masts have been designed to work best on the
Dragonfly sails.
Discover more
PROGRESSIVE FLEX & BEND CURVE
The standout feature of NeilPryde masts is the unique Flex and Bend Curve. Our shorter masts are close to 'flex-top curve' while longer masts are closer to 'constant curve': this is why we call it the Progressive Flex and Bend Curve.
The distance from the mast bottom to the boom is relatively constant between all mast lengths. Short masts are supported by the boom head at a relatively higher point than long masts. To compensate for much less 'flexing length' above the boom, short masts will have a relatively softer top section compared to long ones as there is much more sail area above the boom that needs to be supported by the mast.
All NeilPryde mast models of the same size will have the same bend curve. This means you are not limited to a particular mast model to match your sail. The curve will only differ across different mast sizes, regardless of the model.
Because of the importance of the sail and mast relationship, and the complexities involved, it is essential to use a NeilPryde mast with a NeilPryde sail. This ensures you can benefit from the full wind range on offer and spend minimal time tuning. All NeilPryde masts are designed with the NeilPryde Progressive Flex and so when used with a NeilPryde sail they have the correct shaping, twist and ability to remain stable in variable conditions. Higher end carbon masts have a faster reflex response and so the mast will return to its original shape with more speed creating better acceleration, speed and control.
RDM v SDM
The NeilPryde RDM masts are compatible in curve and flex with NeilPryde SDM masts. Choose an RDM mast for a softer, more forgiving feel and durability and an SDM mast for a faster response and more direct feel.
We recommend the use of SDM masts on cambered sails.
WHY NEILPRYDE MASTS?
Four reasons why it's better to use NeilPryde sails with NeilPryde masts:
- You'll get maximum performance from your rig.
- To ensure optimum fit.
- Our sails are designed around our mast curves.
- Particularly in cambered sails it is critical to use the right mast diameter for cams to have optimum function.